Order Products : sales@su-jiao.com
Syncure™ System S110FV
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Syncure™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9xGQp6_Syncure-System-S110FV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Syncure™ systems are two part moisture crosslinkable compounds, is a UL bulletinized high strength, RoHS compliant highly flame retardant insulation compound. Graft resin component of this system has approximate shelf life of 6 months from the date of production. Please consult PolyOne for its use past 6 months. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Gel Content 1 | 60 | % | ASTM D2765 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Tensile strength retention rate 2(121°C, 1.91 mm) | 100 | % | |
| Elongation retention rate 3(121°C, 1.91 mm) | 94 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation 4(131°C) | 3.0 | % | UL 1581 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame test 5 | Pass | UL 1581 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Catalyst parent mixture- V-0044G RoHS 6 | 50 | % | |
| Transplant-based resin- S-1060A 7 | 50 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 54 | ASTM D2240 | |
| Shaw D, 10 seconds | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 8(Yield) | 17.2 | MPa | ASTM D638 |
| Tensile Elongation 9(Break) | 400 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| UL Temperature Rating | 90 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 39 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.54 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 2.8E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (1.91 mm) | 27 | % | ASTM D2863 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 注释：以上情况代表了在30密耳壁的14 AWG上测量得出的典型属性。存放和搬运：包装打开之后应在48小时之内使用，避免自硬化和报废。 |
| Note Message | |
|---|---|
| 1 . | Cross-linked PE, Method B (Non-Arbitration Test) |
| 2 . | 336 hours, UL standard |
| 3 . | 336 hours, UL standard |
| 4 . | 500g,1 hour |
| 5 . | Vertical |
| 6 . | V-0044G |
| 7 . | S-1060A |
| 8 . | Type 4, 510mm/min |
| 9 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polylink Power Cable P-10040-CB | Polylink Polymers (India) Ltd. | TP, Unspecified | Polylink Power Cable |
| Radilon® S ERV2510 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| QR Resin QR-5020 | QTR, Inc. | PEI+PC | QR Resin |
| Nylene® 132 HS | Custom Resins Group | Nylon 66 | Nylene® |
| Laticonther 75 GR/50 | LATI S.p.A. | PBT | Laticonther |
