Order Products : sales@su-jiao.com
Visico™ LE4423/LE4460/ LE4437
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Visico™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9x8caq_Visico-LE4423-LE4460-LE4437.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Visico LE4423/LE4460/LE4437 LE4423/LE4460/LE4437 is a natural, moisture-induced crosslinking polyethylene compound that is designed for use as low voltage wire insulation and jacketing. The combination of a VISICO LE4423 base resin, along with the LE4460 brominated flame retardant masterbatch and the LE4437 catalyst, provides a highly scorch retardant compound with excellent thermal stability and good retardant flame properties. LE4423/LE4460/LE4437 contains a patented scorch retardant additive (SRA) that increases the processing window for a moisture crosslinking compound and minimizes the tendency for premature crosslinking in the extruder, head or die. A finished compound that is composed of 75 parts of LE4423 mixed with 20 parts of LE4460 and 5 parts of LE4437 is recognized by Underwriters Laboratories as VISICO HORIZONTAL. VISICO HORIZONTAL is designed to reduce normal PE flame spread characteristics and achieve an HB-1 flame rating on 14 AWG wires and larger. LE4437 also provides, in addition to catalyst, a stabilization package containing suitable antioxidants, a metal passivator and a metal deactivator. Properly mixed, during the extrusion process, LE4423/LE4460/LE4437 exhibits excellent thermal stability to oxidation. LE4423/LE4460/LE4437 is readily pigmented to a variety of colors using standard wire & cable color concentrates designed for thermoplastic or crosslinked polyethylene. UV wether resistance is obtained by the addition of a suitable carbon black or UV additive. Using Visico LE4432 in place of LE4437 combines a tin catalyst along with the proper carbon black to provide a black, UV resistant, moisture crosslinking cable insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D792 | ||
| Base Resin | 0.923 | g/cm³ | |
| -- 1 | 0.941 | g/cm³ | |
| -- 2 | 2.00 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 16.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mechanical Properties After Aging in Air Oven, 121°C, 168 hr (Change in Tensile Strength) | < -10 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Creep 3 | ICEA T-28-562 | ||
| Elongation under load : 150°C | < 50 | % | |
| Permanent deformation | < 5.0 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Horizontal Flame Test 4 | Pass |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 22 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 2.50 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 5.0E-4 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 146 | °C | |
| Cylinder Zone 2 Temp. | 155 | °C | |
| Cylinder Zone 3 Temp. | 163 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Die Temperature | 177 | °C |
| Note Message | |
|---|---|
| 1 . | Catalyst |
| 2 . | Masterbatch |
| 3 . | 0.20 MPa |
| 4 . | 14 AMG-30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Synthos EPS® 1020S/CZ | Synthos S.A. | PS (EPS) | Synthos EPS® |
| Ultradur® B 4300 M5 | BASF Corporation | PBT | Ultradur® |
| Nylene® 5130 PT15 | Custom Resins Group | Nylon 66 | Nylene® |
| CERTENE™ PBM-5035 | Muehlstein | PP Impact Copolymer | CERTENE™ |
| HiFill® PPSU TL10 | Techmer Engineered Solutions | PPSU | HiFill® |
