Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic THV 221GZ
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9uYSie_3M-Dyneon-Fluoroplastic-THV-221GZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dyneon™ THV 221G Z Fluorothermoplastic is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride in the form of pellets. It provides a balance of low temperature processing, low flammability, thermal stability, and melt processability. It can be used to prepare extruded films, tubes, profiles, and wire coatings. It is useful for applications that require the highest level of flexibility, transparency, low temperature fusion or bonding capability with moderate chemical resistance. Laminated film of this product exhibit excellent weatherability and good anti-soiling properties. This product can be E-beam cured without the need of prorads to improve its high temperature capability with minimal loss of flexibility. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.95 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) | 20 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 20.0 | MPa | ISO 527-1 |
| Tensile Strain (Break) | 600 | % | ISO 527-1 |
| Flexural Modulus | 80.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 120 | °C | ISO 12086 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | > 65 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Nozzle Temperature | 200 to 230 | °C | |
| Mold Temperature | 50.0 to 100 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Die Temperature | 180 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7530 GF 15 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Badaflex® TPE-S 30A 1384 | Bada AG | SEBS | Badaflex® |
| apilon 52c® C S200 | API SpA | TPU-Polyester | apilon 52c® |
| EMOPLEN® A 1310 T2 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| Petrothene® PM92973 | LyondellBasell Industries | LLDPE | Petrothene® |
