Order Products : sales@su-jiao.com
ICORENE® 3545
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9tRGAp_ICORENE-3545.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 3545 is a linear low density polyethylene specifically developed for rotational moulding. ICORENE® 3545 is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal) | 30.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 18.0 | MPa | ASTM D638 |
| Flexural Modulus | 650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 180 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecolen® CP10 GR15 NL | Eurotec Engineering Plastics | PP Copolymer | Tecolen® |
| LNP™ THERMOCOMP™ DX11354 compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ THERMOCOMP™ |
| MAJORIS AG200E - 8229 | AD majoris | HDPE | MAJORIS |
| Delene 2040 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | Delene |
| Styropek® BFL 397S | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
