Order Products : sales@su-jiao.com
Andur 950 AP
| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9mzZEL_Andur-950-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 950-AP is the result of several years of research to develop a high performance, moderate cost prepolymer for the cast urethane industry. This new product is a poly-ester/ether, toluene diisocyanate-terminated prepolymer. An elastomer with a hardness of 95 Shore A is obtained by reaction with Curene 442. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 2610 | cP | ASTM D2393 |
| 100°C | 710 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 5.4 to 5.8%Specific Gravity, ASTM D792, 77°F: 1.151 g/mlSpecific Gravity, ASTM D792, 212°F: 1.09 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoFlo 50A-300 | KMI Group Inc. | SEBS | PrimoFlo |
| Tenac™-C Z4513 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| NEXUS Reprocessed ABS 8/3 RBK | Nexus Resin Group, LLC. | ABS | NEXUS Reprocessed |
| KOPET® KP513UGV0 | Kolon Plastics, Inc. | PET | KOPET® |
| OXNILON 66 Unfilled | Oxford Polymers | Nylon 66 | OXNILON 66 |
