Order Products : sales@su-jiao.com
FLEXITEQ™ F75A160
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9mOPO3_FLEXITEQ-F75A160.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ F75A160 is a formulation based on Santoprene™ rubber technology. It has been developed for conventional injection moulding applications requiring high tear resistance and elongation, whilst retaining good compression set. It is polyolefin based and is completely recyclable. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.948 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 3.90 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 6.50 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 510 | % | ASTM D412 |
| Tear Strength 4(23°C) | 42.0 | kN/m | ASTM D624 |
| Compression Set 5(23°C, 70 hr) | 27 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 70.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 160 to 190 | °C | |
| Middle Temperature | 180 to 210 | °C | |
| Front Temperature | 190 to 220 | °C | |
| Processing (Melt) Temp | 190 to 220 | °C | |
| Screw Speed | 100 to 200 | rpm |
| Note Message | |
|---|---|
| 1 . | Die C, 500 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Die C, 500 mm/min |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 115375 C | RTP Company | PLA+PMMA | RTP |
| DENYL 6 3016 | Vamp Tech | Nylon 6 | DENYL |
| Dugdale PVC Rigid Injection Molding Compound | Dugdale Plc | PVC, Rigid | Dugdale PVC |
| Keliren® CM352 | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
| Plexar® PX3060 | LyondellBasell Industries | LLDPE | Plexar® |
