Order Products : sales@su-jiao.com
KRATON® D1113 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9iH9cI_KRATON-D1113-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1113 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below.
Kraton D1113 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 24 | g/10 min | |
| Antioxidant Additive 1 | 0.080 to 0.30 | % | Internal Method |
| Polystyrene Content | 15 to 17 | % | Internal Method |
| Solution Viscosity - Toluene, 25% wt (25°C) | 470 to 890 | mPa·s | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Diblock Content | 56.0 | ||
| Dust, Talc | 0.30 to 0.40 | % | Internal Method |
| Styrene/Rubber ratio | 16/84 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, 149°C, Compression Molded) | 23 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.345 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 4.14 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 1500 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2% wt. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO ABS 722 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| Styropor® P 326 | BASF Corporation | PS (EPS) | Styropor® |
| Ad-Tech Polyester NO. 29 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Fainplast PVC PK 55/KN | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| LNP™ THERMOCOMP™ DF006 compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ THERMOCOMP™ |
