Category: | PP, Unspecified , Polypropylene |
Manufacturer: | Westlake Chemical Corporation |
Trademark: | Epolene® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 9gCygL_Epolene-E-25.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Epolene E-25 is a maleic anhydride grafted polypropylene recommended as a coupling agent for polypropylene (PP) composites and for providing slip resistance in floor finish emulsions. Because of the polarity and anhydride functionality, Epolene E-25 is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, calcium carbonate, and metals. |
General Information | |
---|---|
Features |
|
Uses |
|
Forms |
|
Physical | Nominal Value | Unit | |
---|---|---|---|
Acid Number | 25.00 | mg KOH/g | |
Molecular Weight 1 | 12000 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Ring and Ball Softening Point | 157 | °C | ASTM E28 |
Fill Analysis | Nominal Value | Unit | Test Method |
---|---|---|---|
Melt Viscosity (125°C) | Solid at this temp. |
Additional Information | Nominal Value | Unit | Test Method |
---|---|---|---|
Penetration Hardness 2(25°C) | < 100 | mm | ASTM D5 |
Fill Analysis | Nominal Value | Unit | Test Method |
---|---|---|---|
Melt Viscosity (190°C) | 300 | mPa·s |
Note Message | |
---|---|
1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
2 . | Needle under 100-g load for 5s, tenths of mm |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 202 D TFE 15 | RTP Company | Nylon 612 | RTP |
RTP 2285 TFE 5 | RTP Company | PEEK | RTP |
Sinvicomp SFE6500 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
Lifolit® SG 45.1095/1 NP | ELASTO | PVC, Flexible | Lifolit® |
Sylvin 916VO-85 Grey 9565 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |