Order Products : sales@su-jiao.com
DENILUB Y 30C 3TF
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9fKWcK_DENILUB-Y-30C-3TF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 66 30% carbon fiber reinforced with PTFE. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.35 | % | |
| Across Flow | 0.65 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 20000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 200 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.5 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.19 | ||
| Static | 0.25 | ||
| Wear Factor 1 | 15.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 7.0 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 50 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 255 | °C | ASTM D648A |
| Vicat Softening Temperature | 255 | °C | ASTM D1525 2 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TIPELIN® 6300B | MOL Petrochemicals Co. Ltd. | HDPE | TIPELIN® |
| Zytel® 73G30HSL BK416 | DuPont Performance Polymers | Nylon 6 | Zytel® |
| Clariant Nylon 6/6 6604-L | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Daelim Po1y® 50100 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| POLYFORT® FPP 22 T K1093 | A. Schulman Europe | PP Homopolymer | POLYFORT® |
