Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-2090-10A/B
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9d0WgD_Shin-Etsu-Elastomer-KE-2090-10A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shin-Etsu KE-2090-10 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-10 is low enough to allow easy pumping through most injection molding systems. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 10 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 4.83 | MPa | |
| Tensile Elongation (Break) | 980 | % | |
| Tear Strength 1 | 6.13 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (32°C) | 26 | wk |
| Additional Information |
|---|
| Press / Post Cure: Press |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 0.25 | hr |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2460B | Teknor Apex Company | TPE | Telcar® |
| AVALON® 95 AB | Huntsman Corporation | TPU-Polyester | AVALON® |
| Formolene® 2520A | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| Infino XK-2307 | SAMSUNG SDI CO., LTD. | PPS | Infino |
| LNP™ LUBRILOY™ RF208 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRILOY™ |
