Order Products : sales@su-jiao.com
Andur 8-6 APSLM/Curene® 3005
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9cVSPS_Andur-8-6-APSLM-Curene-3005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8-6APSLM is a polyester based liquid, toluene diisocyanate terminated prepolymer designed to remain liquid at room temperature. Elastomers with a Shore A durometer hardness of 84-87 can be obtained when Andur 8-6APSLM is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be prepared by curing Andur 8-6APSLM with various polyols, combinations of polyols and Curene 442, other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.69 | MPa | ASTM D412 |
| 300% strain | 5.86 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 51.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Compression Set | 25 | % | ASTM D395B |
| Bayshore Resilience | 34 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 150 | min | |
| Demold Time | 30 | min | |
| Post Cure Time | |||
| 22°C | 72 | hr | |
| 99°C | 16 | hr |
| Additional Information |
|---|
| Die C Tear, ASTM D1004: 310 pliAverage Split Tear, ASTM D1938: 130 pliStoichiometry Curative Level: 95%Grams Curene 3005 per 100 grams Andur 8 to 6 APSLM: 21.5Mix Temperature: Andur 8-6 APSLM: 190°F Curene 3005: 235°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 113 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP ERTALON® 6 XAU+ | Quadrant Engineering Plastic Products | Nylon 6 | Quadrant EPP |
| Elastollan® 1185A10LC | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyether | Elastollan® |
| GERMAMID 6 GF 10 H | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| INEOS PP 100-GA12 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| ISOTHANE® 1095AU-K8 | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyester | ISOTHANE® |
