Order Products : sales@su-jiao.com

EVALENE® HDPE HJ04602

Category:	HDPE , High Density Polyethylene
Manufacturer:	JG Summit Petrochemical Corporation
Trademark:	EVALENE® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9YZWlC_EVALENEHDPEHJ04602.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EVALENE ® HJ04602 is a narrow molecular weight distribution resin intended to deliver robust performance for applications requiring toughness, balanced mechanical properties and good processability. EVALENE ® HJ04602 is designed to meet the rigorous processing requirements of high-speed injection and compression molding equipment, offering opportunities to achieve better economics without compromising performance.

FEATURES

Medium Flow

Excellent Izod impact Strength

High environmental stress crack resistance (ESCR)

Outstanding organoleptics*

Meets Philippine FDA food contact requirements

Halal-certified

TYPICAL APPLICATIONS

Beverage caps for mineral water, juice and tea drinks

General Information
Features	Excellent Organoleptic Properties High ESCR (Stress Cracking Resistance) High density Impact resistance, high Workability, good Medium liquidity Good toughness Compliance of Food Exposure Narrow molecular weight distribution
Uses	Shield
Forms	Particle
Processing Method	Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Density ¹	0.960	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow (48 hours)	1.2 - 1.6	%	Internal method
Environmental Stress-Cracking Resistance (10% Igepal, F50)	4.00	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 1% Secant ²	1370	MPa	ASTM D638
Tensile Strength ³			ASTM D638
Yield	26.0	MPa	ASTM D638
Fracture	11.0	MPa	ASTM D638
Tensile Elongation ⁴			ASTM D638
Yield	17	%	ASTM D638
Fracture	1200	%	ASTM D638
Flexural Modulus - 1% Secant ⁵	780	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁶(23°C)	180	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	78.0	°C	ASTM D648

Additional Information	Nominal Value	Unit
Compression Molding Temperature	150 - 190	°C

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 - 220	°C
Mold Temperature	20 - 40	°C

Note Message
1 .	23°C
2 .	5.0 mm/min
3 .	50 mm/min
4 .	50 mm/min
5 .	1.3 mm/min
6 .	Partial Break

Resin Grade	Manufacturer	Category	Trademark
Texalan® 6 Series 698A	Austin Novel Materials Co. Ltd.	TPU-Ester/Ether	Texalan® 6 Series
Hipolyene 5198 FLM	Zylog Plastalloys	TPO (POE)	Hipolyene
MAJORIS EC380	AD majoris	PP, Unspecified	MAJORIS
OmniLon™ PA6/6 U IM20 BK1000	OMNI Plastics, LLC	Nylon 66	OmniLon™
NORYL™ FE1630PW resin	SABIC Innovative Plastics Europe	PPE+PS	NORYL™