Order Products : sales@su-jiao.com
Primefin V525
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Lucent Polymers, Inc. |
| Trademark: | Primefin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9X2bWE_Primefin-V525.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Impact Modified Polypropylene Colors Available Meets GMP.PP.001, ESB-M4D175-A |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.4 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 10 | % | ASTM D638 |
| Flexural Modulus | 965 | MPa | ASTM D790 |
| Flexural Strength | 37.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 55.6 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL 83-F943D-NT | Teknor Apex Company | TPE | Telcar® |
| HiFill® PA6/6 GF30 HR L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LARIPUR® LPR 2203-93A | COIM S.p.A. | TPU-Polyether | LARIPUR® |
| POLYfill PP EIP2012 F | Polykemi AB | PP, Unspecified | POLYfill |
| PETILEN S 0564 | PETKIM Petrokimya Holding A.S. | HDPE | PETILEN |
