Order Products : sales@su-jiao.com
ISOTHANE® 1070A-S
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9W7I6P_ISOTHANE-1070A-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISOTHANE 1070A-S product is polyester based thermoplastic polyurethane. It exhibits excellent hydrolytic resistance, UV resistance, easy flow, good antistatic and low temperature performance properties. This product can be injection molded, blow molded, and extruded. Suggested Applications: Sheet & film, Cable & wire, Boots, Hoops, Tubes, Hose. Appearance: Transparent spherical pellets. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 6.30 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Tear Strength 1 | 96.0 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+8 - 1.0E+9 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Screw L/D Ratio | 25.0:1.0 | ||
| Screw Compression Ratio | 3.0:1.0 |
| Injection instructions |
|---|
| Feed Section: 170°CTransition Section: 175°CMetering Section 1: 180°CMetering Section 2: 175°CDie: 170°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXT REGRIND PA6 8267-300RG | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT REGRIND |
| NEXUS PE LDPE-1017 | Nexus Resin Group, LLC. | LDPE | NEXUS PE |
| Daelim Po1y® PP-173S | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
| Favorite REG250 | Favorite Plastics | PE, Unspecified | Favorite |
| LNP™ STAT-KON™ PFD04S compound | SABIC Innovative Plastics Europe | Nylon 6 | LNP™ STAT-KON™ |
