Order Products : sales@su-jiao.com
KRATON® D1164 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9RrgQ4_KRATON-D1164-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below.
Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.0 to 15 | g/10 min | ASTM D1238 |
| Antioxidant Additive 1 | 0.080 to 0.30 | % | Internal Method |
| Ash Content - T, Talc | 0.2 to 0.4 | wt% | Internal Method |
| Polystyrene Content | 28 to 31 | % | Internal Method |
| Solution Viscosity - Toluene, 25%w (25°C) | 200 to 400 | mPa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Styrene/Rubber ratio | 29/71 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 53 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 3.07 | MPa | Internal Method |
| Tensile Strength (Yield) | 27.6 | MPa | Internal Method |
| Tensile Elongation (Break) | 1000 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2% wt. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MBA PP 2126 | MBA Polymers | PP Impact Copolymer | MBA PP |
| TARFLON™ SC-253 | Idemitsu Kosan Co., Ltd. | PC+ABS | TARFLON™ |
| UBESTA 3030JFX1 | UBE Industries, Ltd. | Nylon 12 | UBESTA |
| CALP 3511G | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Grilamid® LV-50H FWA black 9225 | EMS-GRIVORY | Nylon 12 | Grilamid® |
