Order Products : sales@su-jiao.com
Safrene® M 9245F
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9QabQG_Safrene-M-9245F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Safrene® M 9245F High Density Polyethylene Resin is a high molecular mass grade which exhibits excellent impact resistance in high density polyethylene rich film formulation. It processes well on most modern generation extruders and can be drawn down as low as 6 micron. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.944 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/21.6 kg | 8.4 | g/10 min | ISO 1133 |
| 190°C/5.0 kg | 0.30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield, molding | 24.0 | MPa | ISO 527-2/50 |
| Fracture, molding | 33.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break, Compression Molded) | > 700 | % | ISO 527-2/50 |
| Flexural Modulus (Compression Molded) | 875 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C, molded | 11 | kJ/m² | ISO 179 |
| 23°C, molded | 23 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 73.0 | °C | ISO 306/B |
| Peak Crystallization Temperature (DSC) | 129 - 132 | °C | ISO 3146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 210 - 220 | °C |
| Extrusion instructions |
|---|
| Feed Zone: 170°C |
| Note Message | |
|---|---|
| 1 . | Unannealed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoMid A500 | TechnoCompound GmbH | Nylon 66 | TechnoMid |
| Spartech Polycom SC7-7210 | Spartech Polycom | PC | Spartech |
| TRILOY® 200NH | Samyang Corporation | PC+ABS | TRILOY® |
| ALCOM® PC 740/4 UV GY1156-04LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| EXTEM™ XH1005 resin | SABIC Innovative Plastics | PI, TP | EXTEM™ |
