Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic THV 505ESDZ
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9QILil_3M-Dyneon-Fluoroplastic-THV-505ESDZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dyneon™ THV 505 ESD Z Fluorothermoplastic is a flexible, fluoroplastic compound composed of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride in the form of pellets. It provides a balance of low temperature processing, low flammability, thermal stability and melt processability along with electrostatic dissipative properties. It can be used to prepare molded parts and extruded films, tubes and profiles. It is useful for applications that require electrostatic dissipation, flexibility, low temperature processing and good chemical resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.97 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) | 5.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 15.0 | MPa | ISO 527-1 |
| Tensile Strain (Break) | 310 | % | ISO 527-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 165 | °C | ISO 12086 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propafilm™ MTP85 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| Andur 7003 AP-S/Curene® 89-LC | Anderson Development Company | PUR-Ether/TDI | Andur |
| LNP™ VERTON™ RV00AE compound | SABIC Innovative Plastics | Nylon 66 | LNP™ VERTON™ |
| Polifil® Nylon 930L-13GF | The Plastics Group | Nylon 6 | Polifil® Nylon |
| ESTOPLAST XU 230UFNN01 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
