Order Products : sales@su-jiao.com
Toughblend® ABS-1400
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
| Trademark: | Toughblend® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9OkKCV_Toughblend-ABS-1400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Toughblend® ABS-1400 is a medium flow and good rigidity and good impact compound. The addition of fillers further enhanced its dimensional stability for parts requiring tight dimension tolerance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.10 to 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 88.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.8 | % | ASTM D638 |
| Flexural Modulus | 5750 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 4.00 mm | 100 | °C | |
| 1.8 MPa, Unannealed, 4.00 mm | 98.0 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Rear Temperature | 220 to 225 | °C | |
| Middle Temperature | 225 to 235 | °C | |
| Front Temperature | 235 to 245 | °C | |
| Nozzle Temperature | 245 to 250 | °C | |
| Processing (Melt) Temp | 220 to 250 | °C | |
| Mold Temperature | 70.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® G black B | Röchling Engineering Plastics SE & Co. KG | HDPE | POLYSTONE® |
| NORDEL™ IP 4760P | The Dow Chemical Company | EPDM | NORDEL™ |
| Bergamid™ A70 G35 U BK TM-X SO3 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| INEOS EMAA M21N430 | INEOS Olefins & Polymers Europe | EMAA | INEOS EMAA |
| OmniTech™ PBAB GR30 | OMNI Plastics, LLC | ABS+PBT | OmniTech™ |
