Order Products : sales@su-jiao.com
Generic PPE+PS+Nylon - Mineral
| Category: | PPE+PS+Nylon , Polyphenylene Ether + PS + Nylon |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9OXlbG_Generic-PPE-PS-Nylon---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPE+PS+Nylon - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.20 - 1.25 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (23°C) | 0.80 - 1.1 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 4200 - 4790 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 60.0 - 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 4.0 - 7.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4000 - 4440 | MPa | ISO 178 |
| Flexural Stress (23°C) | 105 - 110 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.5 - 4.0 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C) | 4.0 - 4.5 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 184 - 205 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 185 - 200 | °C | ISO 306 |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow | 5.0E-5 - 6.0E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral | 6.5E-5 | cm/cm/°C | ISO 11359-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 105 | °C | |
| Drying Time | 2.5 - 3.5 | hr | |
| Suggested Max Moisture | 0.020 - 0.070 | % | |
| Rear Temperature | 270 - 279 | °C | |
| Middle Temperature | 282 - 290 | °C | |
| Front Temperature | 285 - 310 | °C | |
| Nozzle Temperature | 288 - 290 | °C | |
| Processing (Melt) Temp | 288 - 310 | °C | |
| Mold Temperature | 79.4 - 110 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPE+PS+Nylon - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Devcon Carbide Putty | Devcon | Epoxy | Devcon |
| Hanwha Total PP HF400 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Homopolymer | Hanwha Total PP |
| Hapflex™ 871-4 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Lucent PC PC/PBT-1212 | Lucent Polymers, Inc. | PC+PBT | Lucent PC |
| Plyophen 23041 | Durez Corporation | Phenolic | Plyophen |
