Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
Trademark: | ISOTHANE® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 9N4kpq_ISOTHANE-1075A.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
ISOTHANE 1075A product is polyester poly(adipate)ester based thermoplastic polyurethanes. It exhibits excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded. Suggested Applications: Seals, Gaskets, Sheets, Film, Tube, Cable, Shoe Sole, Sporting Equipments and Mechanical Goods. |
General Information | |
---|---|
Features |
|
Uses |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A) | 77 | ASTM D2240 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Taber Abrasion Resistance (H-22 Wheel) | 15.0 | mg | ASTM D1044 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress | ASTM D412 | ||
50% Strain | 3.10 | MPa | |
100% Strain | 4.80 | MPa | |
300% Strain | 10.0 | MPa | |
Tensile Strength (Yield) | 33.0 | MPa | ASTM D412 |
Tensile Elongation (Break) | 650 | % | ASTM D412 |
Tear Strength 1 | 80.0 | kN/m | ASTM D624 |
Compression Set | ASTM D395B | ||
23°C, 22 hr | 25 | % | |
70°C, 22 hr | 30 | % |
Note Message | |
---|---|
1 . | Die C |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 205 HS | RTP Company | Nylon 66 | RTP |
SABIC® HDPE M40053S | Saudi Basic Industries Corporation (SABIC) | HDPE Copolymer | SABIC® HDPE |
Vyncolit® TEM 9053 | Vyncolit N.V. | Epoxy | Vyncolit® |
Forprene® 6NE901A70 | SO.F.TER. SPA | TPV | Forprene® |
Plasmer 1050DBC/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |