Order Products : sales@su-jiao.com
TAISOX 9000
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAISOX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9ICwKZ_TAISOX-9000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TAISOX 9000 is a high density polyethylene material,. This product is available in North America, Europe or Asia Pacific,. The main features of TAISOX 9000 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.070 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | 500 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 25.5 | MPa | ASTM D638 |
| Fracture | 36.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 850 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 637 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 123 | °C | ASTM D1525 |
| Melting Temperature | 130 | °C |
| Additional Information |
|---|
| Notched Izod Impact Strength, ASTM D256: 22 kg-cm/cm²Blow Up Ratio: 3 to 6 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F7890 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| McCann PP M40TCPP10 | McCann Plastics Inc. | PP Copolymer | McCann PP |
| SLOVAMID® 66 GF 25 FRI 3 TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| CompaDur® 121 GF 20 black (024) | DimeLika Plast GmbH | PBT | CompaDur® |
| Lifoflex® GC 1030 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
