Order Products : sales@su-jiao.com
Advanced Composites ADX-2001
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9HuZP3_Advanced-Composites-ADX-2001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ADX-2001 is a polypropylene product,. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 23 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 67 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 19.9 | MPa | ISO 527-2 |
| Flexural Modulus | 1820 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 6.5 | kJ/m² | ISO 180 |
| 23°C | 36 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 107 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 210 - 216 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 210 | °C | |
| Processing (Melt) Temp | 199 - 249 | °C | |
| Mold Temperature | 40.0 - 50.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 50 to 60% of machine capacityScrew RPM: 1 to 2 secs before mold open |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SA122-62 | RJM International, Inc. | PC+ABS | RJM |
| Nymax™ ND633 GF Black | PolyOne Corporation | Nylon 6 | Nymax™ |
| ADDINYL B2 Z V25 | ADDIPLAST | Nylon 6 | ADDINYL |
| Ferro PP TPP20AJ46BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| Durethan® BKV 30 EF 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
