Order Products : sales@su-jiao.com

Texalan® 4 Series 485A

Category:	TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester)
Manufacturer:	Austin Novel Materials Co. Ltd.
Trademark:	Texalan® 4 Series
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9HL1wg_Texalan-4-Series-485A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Texalan® 4 Series 485A is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific, Europe, or North America for blow molding, calendering, coextrusion, extrusion, film extrusion, or injection molding.

Important attributes of Texalan® 4 Series 485A are:

Chemical Resistant

High Strength

Impact Resistant

Low Temperature Resistant

Wear Resistant

General Information
Features	Good Abrasion Resistance High Elasticity High Impact Resistance High Tensile Strength Low Temperature Resistant Oil Resistant
Processing Method	Blow Molding Calendering Coextrusion Extrusion Film Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.18 to 1.22	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	82 to 88		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Abrasion Resistance	< 40.0	mm³	ISO 4649

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
100% Strain	> 6.50	MPa
300% Strain	> 12.0	MPa
Tensile Stress (Yield)	> 40.0	MPa	ISO 37
Tensile Elongation (Break)	> 580	%	ISO 37
Tear Strength	> 75	kN/m	ISO 34-1
Compression Set (70°C)	< 34	%	ISO 815

Resin Grade	Manufacturer	Category	Trademark
Qenos PE GF7660	Qenos Pty Ltd	HDPE, MMW	Qenos PE
Shandong PA6 ZRPA6	Shandong Dongchen Engineering Plastics Co., Ltd.	Nylon 6	Shandong PA6
SLOVALEN® PH 69 GF 40	Plastcom	PP, Unspecified	SLOVALEN®
Sylvin 9812-70 NATURAL	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Gallonprene® GP540-9001(n)F	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®