Order Products : sales@su-jiao.com

KPOL-HDPE HD K-10.0/948

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	9Gmm4c_KPOL-HDPE-HD-K-10-0-948.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High Density Polyethylene Extra high molecular weight, hexene copolymer Extrusion-Blow Molding

Characteristics

The KPOL HD K-10.0/948, is a high molecular weight high-density polyethylene, copolymer.

Offers good processability, outstanding stress cracking resistance (ESCR), excellent stiffness and impact strength. Suitable for blow molding of large volumes.

Applications

Typical blow molded applications include containers and drums from 20 to 200 liters, for chemical, agrochemical and food package, small tanks and bedliner, Pallets, Automotive dunnage, Truck bedliners.

The KPOL® resin meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer Food Contact Acceptable Good Impact Resistance Good Processability High Density High ESCR (Stress Crack Resist.) High Molecular Weight High Stiffness
Uses	Agricultural Applications Automotive Applications Containers Drums Food Packaging Packaging Pallets
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Blow Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.948	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	10	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
50°C, 1.91 mm, 10% Igepal CO-630	200	hr	ASTM D1693B
50°C, 3.18 mm, 100% Igepal CO-630	> 650	hr	ASTM D1693A

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	68		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	25.0	MPa	ASTM D638
Tensile Elongation (Break)	700	%	ASTM D638
Flexural Modulus - Tangent	1.25	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength	195	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -77.0	°C	ASTM D746
Vicat Softening Temperature	125	°C	ASTM D1525
Melting Temperature	135	°C	DSC
Heat Deflection Temperature	74	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
TABOREN PC 75 T 20	SILON s.ro	PP Copolymer	TABOREN
TORZEN® GM3800HSL BK20	INVISTA Engineering Polymers	Nylon 66	TORZEN®
ColorRx® NY3-1000RX	LTL Color Compounders, Inc.	Nylon, Unspecified	ColorRx®
Sylvin 8280-60 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Rotuba CAP CP800 (18% Plasticizer)	Rotuba Extruders, Inc.	CAP	Rotuba CAP