Grupo IDESA HIPS HI-730-S-02

Category:	SBC , Styrene Butadiene Block Copolymer
Manufacturer:	Grupo IDESA, S.A. de C.V.
Trademark:	Grupo IDESA HIPS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	99dcTr_Grupo-IDESA-HIPS-HI-730-S-02.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Medium Impact Styrene-Butadiene Copolymer in form of translucent pellet, that shows flexibility, processability, easy molding.

General Information
Features	Copolymer Workability, good Good formability Good flexibility Disposable Medium impact resistance
Uses	Household goods Food container
Agency Ratings	FDA 21 CFR 177.1640
Appearance	Translucent
Forms	Particle
Processing Method	Extrusion Extrusion blow molding Thermoforming Injection molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	5.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	29.9	MPa	ASTM D638
Fracture	31.9	MPa	ASTM D638
Tensile Elongation (Break)	33	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	76	J/m	ASTM D256

Optical	Nominal Value	Unit	Test Method
Yellowness Index	16	YI	ASTM D1925

Additional Information
The value listed as Yellowness, ASTM D1925, was tested in accordance with MP-727 test method.Melt Mass-Flow Rate, MP-720, 200°C/5.0 kg: 4 to 6 g/10 minNotched Izod Impact, MP-721: 6.5 to 9 kg-cm/cmTensile Strength @ Yield, MP-722: 260 to 350 kg/cm²Tensile Strength @ Break, MP-722: 280 to 370 kg/cm²Tensile Elongation @ Break, MP-722: 26 to 40%Pellet Size. MP-725: 3 mm maxPellet>3=<20 mm: 0.99% maxPellet>20 mm: 0.01% max

Additional Information

The value listed as Yellowness, ASTM D1925, was tested in accordance with MP-727 test method.Melt Mass-Flow Rate, MP-720, 200°C/5.0 kg: 4 to 6 g/10 minNotched Izod Impact, MP-721: 6.5 to 9 kg-cm/cmTensile Strength @ Yield, MP-722: 260 to 350 kg/cm²Tensile Strength @ Break, MP-722: 280 to 370 kg/cm²Tensile Elongation @ Break, MP-722: 26 to 40%Pellet Size. MP-725: 3 mm maxPellet>3=<20 mm: 0.99% maxPellet>20 mm: 0.01% max

Resin Grade	Manufacturer	Category	Trademark
Adell Polyamide BR-38	Adell Plastics, Inc.	Nylon 6	Adell Polyamide
Ferro PP LPP25BK51BK	Ferro Corporation	PP, Unspecified	Ferro PP
GERMAMID 6.6 HV	Kunststoff-Kontor-Hamburg GmbH	Nylon 66	GERMAMID
ESPOLEX WT521	Sumitomo Chemical America, Inc.	TPO (POE)	ESPOLEX
Keltan® 1500R	LANXESS Buna GmbH	EPDM	Keltan®