Order Products : sales@su-jiao.com
Kemcor MD 600
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 96DCvU_Kemcor-MD-600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kemcor MD 600 is a Medium Density Polyethylene material. It is available in North America for extrusion or pipe extrusion. Important attributes of Kemcor MD 600 are:
Typical application of Kemcor MD 600: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1070 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 18.0 | MPa | |
| Break | 25.0 | MPa | |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Flexural Modulus | 650 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx WP63E20 | The Matrixx Group, Inc. | Nylon 6 | Matrixx |
| Moplen HP522H | LyondellBasell Industries | PP Homopolymer | Moplen |
| KUBE PIR 22402 | KUBE Electronics AG | HDPE | KUBE PIR |
| Jiangsu Sinarise PI800M | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| Mafill® CR XG 5544 | Ravago Group | PP, Unspecified | Mafill® |
