Order Products : sales@su-jiao.com

Silastic® Q7-4720

Category:	Silicone , Silicone
Manufacturer:	Dow Corning Corporation
Trademark:	Silastic®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	95dk94_SilasticQ74720.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Raw materials for medical device fabrication in the Healthcare Industry APPLICATIONS Silastic® BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are heat-cured high consistency silicone rubbers designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. DESCRIPTION Silastic BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are a series of two-part, enhanced-tear-resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry

Message

Raw materials for medical device fabrication in the Healthcare Industry

APPLICATIONS
Silastic® BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are heat-cured high consistency silicone rubbers designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

DESCRIPTION
Silastic BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are a series of two-part, enhanced-tear-resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry

General Information
Features	High Gas Permeability No frost Radiation disinfection Pressure cooker disinfection Ethylene oxide disinfection Good coloring High pressure heating resistance Compliance of Food Exposure
Uses	Medical/nursing supplies
Agency Ratings	FDA 21 CFR 177.2600

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.11	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	22		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (200% Strain)	0.400	MPa	ASTM D412
Tensile Strength	9.29	MPa	ASTM D412
Tensile Elongation (Break)	1300	%	ASTM D412
Tear Strength ¹	32.2	kN/m	ASTM D624
Compression Set	30	%	ASTM D395

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
RTP 285H TFE 13 SI 2	RTP Company	Nylon 66	RTP
Thermoset Plastics 300 No.18	Thermoset, Lord Chemical Products	Epoxy	Thermoset Plastics
Unipren® Elastomers B3 PRTA010 40A UP312	Petropol Industry and Trade of Polymers LTDA	PP+EPDM	Unipren® Elastomers
Axpoly® r-PP51 1000	Axion Polymers	PP Copolymer	Axpoly®
Sylvin 8200-88C Clear 876	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin