Order Products : sales@su-jiao.com

Qenos PE HD1090

Category:	HDPE , High Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	94MSBW_Qenos-PE-HD1090.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HD1090 is an injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance. HD1090 is intended for use in production of mouldings such as sealant cartridges, pails, crates and closures. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing. HD1090 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

Message

HD1090 is an injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance.

HD1090 is intended for use in production of mouldings such as sealant cartridges, pails, crates and closures. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

HD1090 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

General Information
Features	Impact resistance, good Good liquidity Compliance of Food Exposure
Uses	Barrel Shell Loading box
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.956	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	47.0	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	30.0	MPa	ASTM D638
Flexural Modulus	1100	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	38	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8319-88FUV Orange 598	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Unichem 9614	Colorite Polymers	PVC, Unspecified	Unichem
Andur 95 AP	Anderson Development Company	PUR-Ether/TDI	Andur
ASI POLYETHYLENE CP 878-01 Natural	A. Schulman Inc.	LLDPE	ASI POLYETHYLENE
LNP™ THERMOCOMP™ Lexan_LGK5030 compound	SABIC Innovative Plastics	PC	LNP™ THERMOCOMP™