Telcar® TL-3954P (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-3954P is a halogen-free thermoplastic elastomer, available in Nat and colors, designed for a variety electrical applications, including wire & cable, requiring flexibility over a wide temperature range. Telcar TL-3954P is a low hardness, high density, RoHS compliant grade that is suitable for both injection molding and extrusion.

General Information
Features	High specific gravity High density smoothness Medium liquidity Lubrication Fill Halogen-free Hardness, low
Uses	Underground cable Cable sheath Electrical wire sheath material Electrical conductor insulation material Wire and cable applications Wire sheath Industrial cable insulation material Connector cord sheath Rubber substitution Terminal cable sheath material
RoHS Compliance	RoHS compliance
Appearance	Opacity Available colors Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.16	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	11	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	38	ASTM D2240
Shore A, 5 seconds, injection molding	36	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	5.52	MPa	ASTM D412
Tensile Elongation (Break)	600	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	188 - 216	°C
Middle Temperature	188 - 216	°C
Front Temperature	188 - 216	°C
Nozzle Temperature	188 - 216	°C
Processing (Melt) Temp	188 - 216	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	177 - 204	°C
Cylinder Zone 2 Temp.	177 - 204	°C
Cylinder Zone 3 Temp.	177 - 204	°C
Cylinder Zone 4 Temp.	177 - 204	°C
Cylinder Zone 5 Temp.	177 - 204	°C
Die Temperature	177 - 204	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	94GMYg_TelcarTL3954PPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
APEX® 03-R0039B-85NT	Teknor Apex Company	PVC, Flexible	APEX®
Escorene™ Ultra LD 713.93 Cast	ExxonMobil Chemical	EVA	Escorene™ Ultra
KumhoSunny PC/ASA HSC7079	Shanghai KumhoSunny Plastics Co., Ltd.	ASA+PC	KumhoSunny PC/ASA
PLUSTEK RA301G6	Polyram Ram-On Industries	Nylon 66	PLUSTEK
Moplen HP550J	LyondellBasell Industries	PP Homopolymer	Moplen