Order Products : sales@su-jiao.com
InnoTuf® HP-2170A
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | InnoTuf® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 94Fzeq_InnoTuf-HP-2170A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HP-2170A is a tough, abrasion resistant elastomer formulated for hand-mix processing methods. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or MDI. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Hardener | 1.01 | g/cm³ | |
| Cured | 1.07 | g/cm³ | |
| Base Resin | 1.08 | g/cm³ | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D2566 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 3.00 | mg | ASTM D4060 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength (Split) | 11 | kN/m | ASTM D470 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 47 Mix Ratio by Weight: 44 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 240 to 360 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.30 | Pa·s | |
| 25°C 2 | 2.1 | Pa·s | |
| 25°C 3 | 7.1 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr | |
| Gel Time | 10 to 20 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 65 to 75 | ASTM D2240 | |
| Tensile Strength | 6.89 | MPa | ASTM D638 |
| Tensile Elongation at Break | 400 | % | ASTM D638 |
| Tear Strength | 34.1 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Mixed |
| 3 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-fax EP390P | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
| Sinvicomp SRP8607 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Toyolac® 100-G10 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| NuSil MED-4980 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| ULTEM™ 2210 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
