Order Products : sales@su-jiao.com

DOW™ HDPE 35060L

Category:	HDPE , High Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	92kzsv_DOW-HDPE-35060L.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HDPE 35060L is a High Density Polyethylene intended for Blow Molding applications. The bimodal molecular weight distribution of this resin leads to a high environmental stress crack resistance without sacrificing the rigidity (density). Its high density allows for weight reduction keeping the container performance. It is especially suitable for the production of bottles, containers and technical hollow articles

Applications:

Containers for:

Household & industrial chemicals (e.g. detergents and softeners)

Personal care products and Cosmetics

Food products

Mineral oils

Car care products

Toys

Automotive parts

Complies with:

U.S. FDA 21 177 1520 (c) 3.2a

Europe Commission Regulation (EU) No 10/2011

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1520(c) 3.2a Europe No 10/2011
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.961	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.29	g/10 min	ASTM D1238
190°C/21.6 kg	27	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance ¹(50°C, 100% Igepal, F50)	> 280	hr	ASTM D1693

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	67		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	28.0	MPa	ASTM D638
Fracture	36.0	MPa	ASTM D638
Tensile Elongation (Break)	1000	%	ASTM D638
Flexural Modulus - 2% Secant	900	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	160	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	129	°C	ASTM D1525

Additional Information
Tests performed in compression molded plaque.Recommended processing conditions: Temperature of the cylinder: 180-190°C Temperature of the die: 200°C

Note Message
1 .	Notched

Resin Grade	Manufacturer	Category	Trademark
RTP 2282 HF	RTP Company	PEEK	RTP
RTP 305	RTP Company	PC	RTP
SHIN-A SE-5200	SHIN-A T&C	Epoxy	SHIN-A
ALCUDIA® HDPE R4805	REPSOL	HDPE	ALCUDIA® HDPE
KRATON® D1116 A	Kraton Polymers LLC	SBS	KRATON®