Ixef® GS-1022 Datasheet,PARA,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Ixef® GS-1022 is a 50% glass-fiber reinforced grade of polyarylamide (PARA) available in several colors. Parts molded from these colored resins can withstand high-energy gamma radiation without significant change in appearance and physical properties. Ixef® GS-1022 resins demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity, based on biocompatibility testing as defined by ISO 10993-1. This resin offers superior strength and stiffness combined with outstanding surface gloss and exceptional flow and is well suited for medical applications, such as single use surgical instruments and structural device housings, and applications in food service equipment. Colors available: Brown: GS-1022 BN01 Blue: GS-1022 BU01 Green: GS-1022 GN01 Grey: GS-1022 GY01 Grey: GS-1022 GY02 Grey: GS-1022 GY51 White: GS-1022 WH01

General Information
Filler / Reinforcement	Glass fiber reinforced material, 50% filler by weight
Additive	Gamma stabilizer
Features	Super rigidity Good dimensional stability Excellent appearance Low hygroscopicity Electron beam disinfection Radioactive permeable Radiation disinfection High strength Good disinfection Ethylene oxide disinfection Anti-gamma radiation Good creep resistance High liquidity Good chemical resistance Biocompatibility
Uses	Surgical instruments Dental application field Medical/nursing supplies Medical equipment Medical devices
Agency Ratings	ISO 10993
RoHS Compliance	Contact manufacturer
Appearance	Available colors
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.78	g/cm³	ISO 1183
Molding Shrinkage	0.10 - 0.30	%	ISO 294-4
Water Absorption (23°C, 24 hr)	0.16	%	ISO 62
Water absorption- Equil, 65% RH	1.5	%	Internal method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	22000	MPa	ISO 527-2
Tensile Stress (Break)	265	MPa	ISO 527-2
Tensile Strain (Break)	1.8	%	ISO 527-2
Flexural Modulus	22000	MPa	ISO 178
Flexural Stress	380	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact Strength	50	kJ/m²	ISO 180

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	230	°C	ISO 75-2/A
CLTE - Flow	1.5E-5	cm/cm/°C	ISO 11359-2

Additional Information
Property values for individual batches will vary within specification limits. Values shown are typical of Ixef GS-1022/WH01 resin; other colorants may alter values.There will be a shift in color when comparing pre-gamma sterilization and postgamma sterilization colors. It is also expected that the colors will revert to some degree, back toward the as-molded color. Lighter colors may display the greatest variation.

Additional Information

Property values for individual batches will vary within specification limits. Values shown are typical of Ixef GS-1022/WH01 resin; other colorants may alter values.There will be a shift in color when comparing pre-gamma sterilization and postgamma sterilization colors. It is also expected that the colors will revert to some degree, back toward the as-molded color. Lighter colors may display the greatest variation.

Injection	Nominal Value	Unit
Drying Temperature	120	°C
Drying Time	0.50 - 1.5	hr
Rear Temperature	250 - 260	°C
Front Temperature	260 - 290	°C
Nozzle Temperature	260 - 290	°C
Processing (Melt) Temp	280	°C
Mold Temperature	120 - 140	°C
Injection Rate	Fast

Injection instructions
Hot runners: 250° to 260°C (482° to 500°F)StorageIxef® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef® processing guide.

Injection instructions

Hot runners: 250° to 260°C (482° to 500°F)StorageIxef® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef® processing guide.

Category:	PARA , Polyarylamide
Manufacturer:	Solvay Specialty Polymers
Trademark:	Ixef®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	8zYhg0_Ixef-GS-1022.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 299 A X 108950 H	RTP Company	Nylon 6	RTP
Bergamid™ A70 G30 Black	PolyOne Corporation	Nylon 66	Bergamid™
Elvax® 410	DuPont Packaging & Industrial Polymers	EVA	Elvax®
Huafon JF-W-AL6030	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
NORYL™ LTA6020 resin	SABIC Innovative Plastics Asia Pacific	PPE+PS	NORYL™