Order Products : sales@su-jiao.com
WPP PP JOSB26287
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8ukUxB_WPP-PP-JOSB26287.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Properties shown below for a medium impact polypropylene copolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 19.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 680 | % | ASTM D638 |
| Flexural Modulus 3 | 860 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 620 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 89.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Polyethylene F022SE | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| Evoprene™ LF 6151 | AlphaGary | SBC | Evoprene™ LF |
| DynaPath™ 1906-SS | Polymer Dynamix | Nylon 6 | DynaPath™ |
| LNP™ THERMOTUF™ MF0049I compound | SABIC Innovative Plastics Europe | PP, Unspecified | LNP™ THERMOTUF™ |
| Sylvin 9077-80 Grey 9556 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
