Order Products : sales@su-jiao.com
DAI-EL™ G-752
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8u8G2m_DAI-EL-G-752.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DAI-EL G-752 is a polyol-curable fluoroelastomer. It offers good mechanical properties and adhesion. Formulation Rubber: 100 parts MT Carbon Black "Thermax N-990": 20 parts Magnesium oxide "MA-150": 3 parts Calcium hydroxide "CALDIC#2000": 6 parts |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.81 to 1.85 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 66 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.40 | MPa | |
| Tensile Strength (Yield) | 14.6 | MPa | |
| Tensile Elongation (Break) | 310 | % | |
| Compression Set 1 | |||
| 25°C, 70 hr | 20 | % | |
| 100°C, 70 hr | 11 | % | |
| 175°C, 70 hr | 16 | % | |
| 200°C, 70 hr | 27 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Adhesiveness Test 2 | |||
| Peeled State - AI | 100 | % | |
| Peeled State - SS | 80 | % | |
| Peeled State - SUS | 100 | % | |
| Cure Temperature 3 | 170 | °C | |
| Cure Time 4 | |||
| Cure time | 2.9 | min | |
| Induction time | 1.9 | min |
| Note Message | |
|---|---|
| 1 . | P-24 O-ring |
| 2 . | Bonding agent: Chemlock 607, After oven-curing |
| 3 . | Curelastometer type II |
| 4 . | Curelastometer type II |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Romiloy® 5720 UV | ROMIRA GmbH | PC+PBT | Romiloy® |
| Rotec® ABS 1501 | ROMIRA GmbH | ABS | Rotec® ABS |
| Vamac® GXF | DuPont Performance Elastomers | AEM | Vamac® |
| 4PROP® 9C19300 | 4Plas | PP Copolymer | 4PROP® |
| Hipolyene 8021 MF HF | Zylog Plastalloys | TPO (POE) | Hipolyene |
