Order Products : sales@su-jiao.com
RELENE® 24FS040
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8t13Tu_RELENE-24FS040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 24FS040 is a film grade Low Density Polyethylene (LDPE) produced by high pressure tubular process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer has been blended with necessary additives during manufacture to obtain good surface slip and easy openability between two layers of the film. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 18.0 | MPa | |
| TD : Break, 40 µm, Blown Film | 16.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 250 | % | |
| TD : Break, 40 µm, Blown Film | 400 | % | |
| Dart Drop Impact (40 µm, Blown Film) | 80 | g | ASTM D1709A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYLOY® M-0100B-V0 | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| DOMAMID® 66GB305H | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| KOPLA PC KBG1030F | KOPLA Co., Ltd. | PBT | KOPLA PC |
| OTECH PVC OW734 - Wire Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| LEXAN™ FXE1112T resin | SABIC Innovative Plastics | PC | LEXAN™ |
