Order Products : sales@su-jiao.com
HIVAL® FL19 NT
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Nexeo Solutions, LLC. |
| Trademark: | HIVAL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8sTi7q_HIVAL-FL19-NT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIVAL®FL19 NT is a low density polyethylene material,. This product is available in North America and is processed by extrusion coating or injection molding. HIVAL®The main features of FL19 NT are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 9.65 | MPa | ASTM D638 |
| Flexural Modulus | 245 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-20°C) | 910 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 40.0 | °C | ASTM D648 |
| Brittleness Temperature | -65.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 163 | °C | |
| Middle Temperature | 171 | °C | |
| Front Temperature | 177 | °C | |
| Nozzle Temperature | 177 | °C | |
| Processing (Melt) Temp | 177 | °C | |
| Mold Temperature | 7.22 - 23.9 | °C | |
| Injection Pressure | 2.76 - 10.3 | MPa | |
| Back Pressure | 1.03 - 3.45 | MPa |
| Injection instructions |
|---|
| Screw Speed: SlowInjection Speed: Slow - Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BT36 ST | A. Schulman Europe | Nylon 6 | VITAMIDE® |
| TOYOBO Urethane E3070A | TOYOBO America, Inc. | PUR-Ether | TOYOBO Urethane |
| Honeywell PMP R100 | Honeywell | PMP | Honeywell PMP |
| Latiohm 66-05 PD01 G/20 | LATI S.p.A. | Nylon 66 | Latiohm |
| Plaslube® J-1/30/TF/22 NAT | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
