Order Products : sales@su-jiao.com
Seblex® 7848
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Seblex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8o2MSS_Seblex-7848.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Seblex 7848 is an oil extended thermoplastic styrenic rubber modified polypropylene compound. It has been formulated with ingredients referenced under the U.S. Code of Federal Regulations Volume 21. It is a low flow injection moulding grade developed for maximum flexibility and low surface hardness to give it "soft-feel" characteristics. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.888 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 2.00 mm | 37 | ||
| Shore A, 5 sec, 2.00 mm | 33 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% Strain, 2.00 mm | 0.800 | MPa | |
| 300% Strain, 2.00 mm | 1.50 | MPa | |
| Tensile Strength 2(Break, 2.00 mm) | 3.20 | MPa | ASTM D412 |
| Tensile Elongation 3(Break, 2.00 mm) | 500 | % | ASTM D412 |
| Tear Strength 4(2.00 mm) | 14.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 15.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | Die C, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP Delrin® Acetal | Quadrant Engineering Plastic Products | Acetal (POM) Homopolymer | Quadrant EPP |
| Cellidor B 500-10 | ALBIS PLASTIC GmbH | CAB | Cellidor |
| Franprene A FA 2970B | Franplast S.r.l. | SBS | Franprene |
| Iupital® F20-61 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
| LUBEMID B27 NATURAL HS | LUBEN PLAST srl | Nylon 6 | LUBEMID |
