Order Products : sales@su-jiao.com
Epolene® E-14E
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8nzFkt_Epolene-E-14E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The Epolene E-14E is a low molecular weight, low density, oxidized polyethylene. The low molecular weight and low softening point contribute to the production of stable, low color emulsions by both atmospheric (wax-to-water) and pressure emulsification methods. Epolene E-14E imparts excellent slip resistance to floor polish films. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Acid Number | 17.00 | mg KOH/g | |
| Molecular Weight 1 | 3600 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 104 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 400 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (125°C) | 225 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide AST03 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| THERMOLAST® K TC5MLZ (Series: AD1) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Novodur® E211 | Styrolution | ABS | Novodur® |
| Evoprene™ 022 | AlphaGary | SBS | Evoprene™ |
| LNP™ THERMOCOMP™ AF002 compound | SABIC Innovative Plastics | ABS | LNP™ THERMOCOMP™ |
