Order Products : sales@su-jiao.com
Soarnol® E3808
| Category: | EVOH , Ethylene Vinyl Alcohol |
| Manufacturer: | Soarus L.L.C. |
| Trademark: | Soarnol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8l9uPY_Soarnol-E3808.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Soarnol E3808 is a 38 mol% ethylene content standard grade of Soarnol with an intermediate melt flow rate. Soarnol E3808 has both excellent barrier to gases as well as water resistance, this resin is primarily used in coextruded film and coextrusion coating applications. This resin can also be used in thermoforming and shrink packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 8.0 | g/10 min | |
| Ethylene Content | 38.0 | wt% | Internal method |
| Volatile Matter | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Permeability 1(20°C, 20 µm) | 0.700 | cm³/m²/24 hr | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 58.0 | °C | DSC |
| Melting Temperature | 173 | °C | DSC |
| Peak Crystallization Temperature (DSC) | 152 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Cylinder Zone 5 Temp. | 220 | °C | |
| Adapter Temperature | 220 | °C |
| Extrusion instructions |
|---|
| Extruder: 40 mm Single screw extruder, L/D = 28Screw: Full-flighted, constant pitch type, CR = 3.5Screen pack: 80/120/50 meshDie: Manifold type, die width = 450 mm, lip clearance = 0.2 mm |
| Note Message | |
|---|---|
| 1 . | Measured with OXTRAN 10/50 (MOCON), 65%RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM ABS 7515 | Ponachem Compound GmbH | ABS | PONACOM ABS |
| Wanthane® WHT-2198 | Wanhua Chemical Group Co., Ltd. | TPU-Capro | Wanthane® |
| UmaPET ULM (aesthetic) | Ester Industries Ltd. | PET | UmaPET |
| EcoVid 43IM | Greener Polymers Inc. | PLA | EcoVid |
| HiFill® PA6 GF15 HS L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
