Order Products : sales@su-jiao.com
Hipolyene 6251 Y M4
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | Hipolyene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8kSBIV_Hipolyene-6251-Y-M4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hipolyene 6251 Y M4 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in Africa & Middle East or Europe. Typical application of Hipolyene 6251 Y M4: Automotive |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 225 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 75 | % | ASTM D638 |
| Flexural Modulus | 20500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 14 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T- 27 Z1 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Ultramid® A3WG6 BK00564 | BASF Corporation | Nylon 66 | Ultramid® |
| AKROMID® A3 GF 50 black (2431) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Cleapact TI-300S | DIC Corporation | SBC | Cleapact |
| E-RIALFILL B 15 50 C | RIALTI Srl | PP, Unspecified | E-RIALFILL |
