Order Products : sales@su-jiao.com
Sumikon® PM-TX250
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8iXEbP_SumikonPMTX250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON PM-TX250 is a Heat dissipative themoset molding compounds, Non-electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.70 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.14 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 20500 | MPa | JIS K6911 |
| Flexural Strength | 95.0 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 1.8 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 4.8 | W/m/K |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 MG 30 TFE 15 | RTP Company | PC | RTP |
| 4MID® 9A24100 | 4Plas | Nylon 66 | 4MID® |
| ESTYRENICS 622 | PCC Plastics & Consultations Center | PS (HIPS) | ESTYRENICS |
| Forprene® 6NE901A75 | SO.F.TER. SPA | TPV | Forprene® |
| Plenco 04304 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
