Order Products : sales@su-jiao.com
FLEXOMER™ DFDA-1137 NT 7
| Category: | VLDPE , Very Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | FLEXOMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8Wwzsm_FLEXOMER-DFDA-1137-NT-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FLEXOMER™ DFDA-1137 NT 7 Very Low Density Polyethylene (VLDPE) Resin is an ethylene copolymer intended for use in molding and extrusion applications where high flexibility is desired. It is especially useful for flexible hose and tube applications as well as for blow molding small, squeezable bottles. It has a high molecular weight and a relatively narrow molecular weight distribution and exhibits excellent low temperature toughness and outstanding flex life characteristics. It is also recommended as a blending component to modify and improve the physical properties of high pressure and linear low density polyethylene resins. Complies with:
|
| General Information | |
|---|---|
| Additive |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F0) | > 500 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant | 117 | MPa | ASTM D638 |
| Tensile Strength (Break) | 19.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 900 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -100 | °C | ASTM D746A |
| Vicat Softening Temperature | 86.1 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 118 | °C | Internal method |
| Additional Information |
|---|
| 根据 ASTM D 1928 程序 C 准备压缩模塑配件。属性将随着模塑条件和老化时间的变化而变化。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 149 - 177 | °C |
| Extrusion instructions |
|---|
| 制造条件： 螺杆类型：所有标准的商用挤出设备 熔体温度范围：300-350°F (149-177 °C) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE PCG40053 | SABIC Americas, Inc. | HDPE | SABIC® HDPE |
| LTP ZE-2601 Al2O3/GF 30% | Chengdu Letian Plastics Co., Ltd | TP, Unspecified | LTP |
| POLYCASA® ACRYL G 88 | Polycasa | Acrylic (PMMA) | POLYCASA® ACRYL |
| Sylvin 3299-95 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LNP™ LUBRICOMP™ OCL36 compound | SABIC Innovative Plastics | PPS, Linear | LNP™ LUBRICOMP™ |
