Order Products : sales@su-jiao.com
Ipiranga GF 4960
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Ipiranga |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8SNkSb_Ipiranga-GF-4960.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. Application: Containers for yogurt, juices, milk, water, alcohol, pharmaceutical products and lubricant oils; |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.961 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.34 | g/10 min | |
| 190°C/21.6 kg | 28 | g/10 min | |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50) | 25.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 35.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 230 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 79.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Barrel Temperature | 180 to 190 | °C | |
| Blow Molding Die Temperature | 185 | °C | |
| Blow Molding Temperature - Feeding Zone | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® TPU 1511 | Premix Oy | TPU, Unspecified | PRE-ELEC® |
| TEREZ PBT TM 4250 | TER HELL PLASTIC GMBH | PBT | TEREZ PBT |
| VENELENE® FA-0238 | Poliolefinas Internacionales, C.A. (Polinter) | LDPE | VENELENE® |
| Topilene® HB242P | Hyosung Corporation | PP Impact Copolymer | Topilene® |
| INNOPOL® PP CS 1-4140 AP | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
