Order Products : sales@su-jiao.com
SIBUR PE 15803-020
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | SIBUR, LLC |
| Trademark: | SIBUR PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8R8I7W_SIBUR-PE-15803-020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PE 15803-020 is a film grade of low-density polyethylene. The grade is additive free. Typical Applications: PE 15803-020 is recommended for film extrusion, including thin films, food packaging and technical films. It complies with EU Food Contact Regulations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.919 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | |
| Appearance - Process test for film | B | % | |
| Extractables | |||
| Mass fraction | 0.4 | % | |
| Odour and taste of aqueous extract | 1.0 | points |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress 1 | |||
| Yield | 9.50 | MPa | |
| Break | 11.7 | MPa | |
| Tensile Strain 2(Break) | 600 | % |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moldex® QS262D/QCM240 | Mitsubishi Chemical Corporation | Polyolefin, Unspecified | Moldex® |
| Gallonprene® GP320-55 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Halene P M325 | Haldia Petrochemicals Ltd. | PP Impact Copolymer | Halene P |
| Epolene® C-16 | Westlake Chemical Corporation | LDPE | Epolene® |
| HTM® 552 | Cytec Industries Inc. | MAH-g | HTM® |
