Order Products : sales@su-jiao.com
MARPOL® LDF 723-C
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8OuioH_MARPOL-LDF-723-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MARPOL® LDF 723-C is a Low Density Polyethylene product. It is available in Asia Pacific, Europe, Latin America, or North America. Typical application: Food Contact Applications. Primary characteristic: food contact acceptable. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.921 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.9 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Toughness | ASTM D882 | ||
| MD | 196 | J/cm³ | |
| TD | 208 | J/cm³ | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 13.6 | MPa | |
| TD : Yield | 13.7 | MPa | |
| MD : Break | 25.0 | MPa | |
| TD : Break | 21.1 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 550 | % | |
| TD : Break | 770 | % | |
| Dart Drop Impact | 86 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 360 | g | |
| TD | 470 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 97.8 | °C | ASTM D1525 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss | 72 | ASTM D2457 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PPX-G30 | Polymer Resources Ltd. | PPE+PS | PRL |
| TOTAL Polyethylene HDPE 5502 (EU) | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Niplene F20 | Soredi S.p.a. | PP Homopolymer | Niplene |
| Lucky Enpla LGF3110R | Lucky Enpla Co LTD | PC+PBT | Lucky Enpla |
| Nylux 66-NAT | KMI Group, Inc. | Nylon 66 | Nylux |
