Order Products : sales@su-jiao.com
Generic PBT+PET - Mineral
| Category: | PBT+PET , Polybutylene Terephthalate + PET |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8Nggso_Generic-PBT-PET---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PBT+PET - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 - 1.54 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.70 - 0.86 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 48.9 - 60.1 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.8 - 4.2 | % | ASTM D638 |
| Flexural Modulus (23°C) | 3600 - 5120 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 83.4 - 148 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 29 - 41 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 105 - 200 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 68.8 - 200 | °C | ASTM D648 |
| Vicat Softening Temperature | 175 - 180 | °C | ISO 306 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 121 | °C | |
| Drying Time | 3.5 - 4.5 | hr | |
| Suggested Max Moisture | 0.020 - 0.025 | % | |
| Rear Temperature | 246 - 250 | °C | |
| Middle Temperature | 252 - 255 | °C | |
| Front Temperature | 257 - 260 | °C | |
| Nozzle Temperature | 252 - 260 | °C | |
| Processing (Melt) Temp | 257 - 260 | °C | |
| Mold Temperature | 76.5 - 90.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PBT+PET - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoprene® 3K6 NERO903 | SO.F.TER. SPA | PP Copolymer | Tecnoprene® |
| Adell PP EP-38 | Adell Plastics, Inc. | PP, Unspecified | Adell PP |
| DJSilicone NE-9470 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| KumhoSunny PBT/ASA HBA5810M | Shanghai KumhoSunny Plastics Co., Ltd. | PBT+ASA | KumhoSunny PBT/ASA |
| LOXIM 200 00 V0 | LOXIM Industries Private Limited | PBT | LOXIM |
