Order Products : sales@su-jiao.com
Glastic® 1603
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8GSChc_Glastic-1603.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Grade 1603 is a multi-purpose, moderate strength, low-cost material that is suitable for injection, compression and transfer molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.98 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.19 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 15900 | MPa | ASTM D638 |
| Tensile Strength (Yield, Compression Molded) | 42.9 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 12400 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 89.7 | MPa | ASTM D790 |
| Compressive Strength | 206 | MPa | ASTM D695 |
| Shear Strength | 50.9 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 230 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 260 | °C | ASTM D648 |
| RTI Elec | 54.4 | °C | UL 746 |
| RTI | 54.4 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.4E+14 1.2E+15 | ohms | ASTM D257 |
| Dielectric Strength 1 | 17 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 6.80 6.30 | ASTM D150 | |
| 1 MHz | 5.20 5.70 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 0.027 0.015 | ASTM D150 | |
| 1 MHz | 0.090 0.12 | ASTM D150 | |
| Arc Resistance | 180 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Permittivity, ASTM D150, 60 Hz, Condition A: 6.3Permittivity, ASTM D150, 60 Hz, Condition D: 6.8Permittivity, ASTM D150, 1 MHz, Condition A: 5.2Permittivity, ASTM D150, 1 MHz, Condition D: 5.7Insulation Resistance, ASTM D257, Condition A: 122 Ohm x 10e13Insulation Resistance, ASTM D257, Condition C: 13.9 Ohm x 10e13Track Resistance, ASTM D2303: 500 minutesDissipation Factor, ASTM D150, 60 Hz, Condition A: 0.015Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.027Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.099Dissipation Factor, ASTM D150, 1 MHz, Condition D: 0.124 |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6418-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Xuchuan XCW-8850N-12 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Network Polymers SMMA MS 125 | Network Polymers, Inc. | Acrylic (SMMA) | Network Polymers SMMA |
| CALIBRE™ 301V-6 | Trinseo | PC | CALIBRE™ |
| ELASTOSIL® AUX BATCH SB 2 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
