Order Products : sales@su-jiao.com
MIRASON™ 12
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | MIRASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8FxwVE_MIRASON-12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MIRASON™ 12 is a Low Density Polyethylene material. It is available in Asia Pacific. Important attributes of MIRASON™ 12 are:
Typical application of MIRASON™ 12: Film |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.927 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Melting Temperature | 114 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Restren ABS 766/V0 | Polimarky Spolka Jawna | ABS | Restren |
| Ultramid® 66 H2 G/35-V0KB NAT0046 | BASF Corporation | Nylon 66 | Ultramid® |
| AKROMID® B3 GF 50 black (4907) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Anjaflam® R450-SZ/F/GF30 | Almaak International GmbH | PBT | Anjaflam® |
| Lionpol HC-204552 | Lion Polymers Incorporated | TPE | Lionpol |
