Order Products : sales@su-jiao.com
KRYSTALFLEX™ PE500
| Category: | PUR-Eth,aliphat , Polyurethane (Polyether, Aliphatic) |
| Manufacturer: | Huntsman Corporation |
| Trademark: | KRYSTALFLEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8FWYqn_KRYSTALFLEX-PE500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KRYSTALFLEX PE500 is a high performance aliphatic polyether film intended for processing by lamination into a range of glass/plastics components. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% strain | 12.4 | MPa | ASTM D412 |
| 300% strain | 34.5 | MPa | ASTM D412 |
| Tensile Strength 2(Yield) | 44.8 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 350 | % | ASTM D412 |
| Tear Strength | 102 | kN/m | ASTM D624 |
| Additional Information |
|---|
| Softening Range, TMA: 195 to 300°FTypical Laminating Parameters:Ultimate Temperature: 230 to 284°FUltimate Pressure: 116 to 174 psiSoaking Time: 30 min/0.25 in |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HMN TR-942 | Chevron Phillips Chemical Company LLC | HDPE | Marlex® |
| Maxelast® C4930 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RELENE® L 60040 | Reliance Industries Limited | HDPE | RELENE® |
| Fainplast PVC PK 7075 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| DiaAlloy FE-15 | Mitsubishi Rayon America Inc. | PPE | DiaAlloy |
