Order Products : sales@su-jiao.com
InnoPlus HD5001S
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8ELsTN_InnoPlus-HD5001S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus HD5001S is high density polyethylene resin which offers excellent thermal stability for high temperature condition, good balance of processability, excellent tenacity and high production rates. InnoPlus HD5001S is recommended for monofilament or yarn applications. Typical Application: Rope, Fishing net, Agricultural net, Tarpaulin, Woven sack |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (25% Igepal, F50) | 30.0 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 28.4 | MPa | ASTM D638 |
| Fracture | 38.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 1000 | % | ASTM D638 |
| Apparent Bending Modulus | 834 | MPa | ASTM D747 |
| Flexural Modulus | 1180 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1 | 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 125 | °C | ASTM D1525 2 |
| Peak Melting Temperature | 125 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 - 260 | °C | |
| Cylinder Zone 2 Temp. | 200 - 260 | °C | |
| Cylinder Zone 3 Temp. | 200 - 260 | °C | |
| Cylinder Zone 4 Temp. | 200 - 260 | °C | |
| Cylinder Zone 5 Temp. | 200 - 260 | °C | |
| Die Temperature | 250 - 260 | °C |
| Extrusion instructions |
|---|
| Stretching temperature: 97-100°CStretching ratio: 8-10 |
| Note Message | |
|---|---|
| 1 . | Partial break |
| 2 . | 速率 A (50°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 303 | Melos GmbH | IIR | Melos™ |
| Sasol Polymers PP ESV265 | Sasol Polymers | PP Random Copolymer | Sasol Polymers PP |
| Sinvicomp SRF9703 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Sylvin 6219-80 Grey 9546 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TEREZ PA 6 7510 GF 50 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
